Drive Power Terminals Functions
This section details the power terminal's location on the drive, each terminals function and best practice installations.
Power Terminal Details
The table below shows the drive Input and Output terminals nomenclature and functions.
Terminal Layout | Terminal Label | Terminal Function |
|---|---|---|
Input Supply | ||
 | ⏚ (Top of drive) | Earth/Ground for the input power supply |
L1/L | 230V Drives - Live phase from Input power supply (L) 400V Drives - Live phase from input power supply (L1) | |
L2/N | 230V Drives - Neutral phase from input power supply (N) 400V Drives - Live phase from input power supply (L2) | |
L3 | 400V Dives - Live phase from input power supply | |
Motor Cables & Brake Resistor connections | ||
 | ⏚ (Bottom of Drive) | Earth/Ground for the motor |
+DC | DC Power supply input positive (+) for:
| |
BR | Brake Resistor Input | |
-DC | DC Power supply input negative (-) for:
| |
U | Motor U Phase | |
V | Motor V Phase | |
W | Motor W Phase | |
Warning
Do not connect the Input Supply terminals to the Motor terminals and vice versa.