General Information
It is the responsibility of the installer to ensure that the equipment or system into which the product is incorporated complies with all relevant legislation and codes of practice which apply in the country of use.
CE Marking
All Invertek Drives Ltd products intended for use within the European Union carry the CE mark to indicate compliance with European Directives (EMC Directive, Low Voltage Directive and Machinery Directive). A declaration of conformity is available from the website, www.invertekdrives.com. For compliance with the European EMC Directive, the necessary guidance is provided within this document and it is the responsibility of the installer to ensure this guidance is followed to ensure compliance.
UKCA Marking
All Invertek Drives Ltd products intended for use within the United Kingdom carry the UKCA mark to indicate compliance with Following UK regulations: Electromagnetic Compatibility Regulations, Supply of Machinery (Safety) Regulations, Electrical Equipment (Safety) Regulations. A declaration of conformity is available from the website, www.invertekdrives.com. For compliance with the relevant sections of the above regulations, the necessary guidance is provided within this document and it is the responsibility of the installer to ensure this guidance is followed to ensure compliance.
UL Conformity
A list of currently listed products is available from the UL website, https://www.ul.com. For compliance with UL requirements, the necessary guidance is provided within this document and it is the responsibility of the installer to ensure this guidance is followed to ensure compliance.
Safe Torque OFF (“STO”) Function
The drive incorporates a hardware STO (Safe Torque Off) Function, designed in accordance with the standards listed below.
Standard | Classification | Independent Approval |
|---|---|---|
EN 61800-5-2:2017 | SIL3 | *TÜV |
EN ISO 13849-1:2023 | PL “e”CAT 3 | |
EN 61508 (Part 1 to 7):2010 | SIL3 | |
EN60204-1:2018 | Uncontrolled Stop “Category 0” | |
EN 62061:2021 + A1:2024 | SIL3 |
NOTE: TÜV Approval of the “STO” function is relevant for drives which have a TÜV logo applied on the drive rating label. The STO input must not be used for any safety related function if the drive unit does not carry the TÜV logo on the rating label. |
Unintended Car Movement
Brake Contact Monitoring (Unintended Car Movement) EN 81-20:2020+A3 (Certified)
Contactorless Operation
The drive can be used without a Motor contactor using the Safe Torque Off inputs according to parts of EN 81-20:2020 and EN 81-50:2020 (Certified)