Group 3.4 System - System Mechanical Data/Linear Units operation
Parameter Number | Parameter Name | Units | Default | Available Settings | Access | Change During Run | Scaling | Size (Bytes) | CAN Register | CAN Sub Index | Modbus Register |
|---|---|---|---|---|---|---|---|---|---|---|---|
P3-08 | Sheave Diameter | N/A | 0.0 | 0.0 ... 2000.0 | RW | Y | 1 = 0.1 | 2 | 2134h | 0 | 308 |
P3-09 | Roping Ratio | N/A | 1: 1:1 | 1: 1:1 2: 2:1 3: 3:1 4: 4:1 | RW | Y | N/A | 1 | 2135h | 0 | 309 |
P3-10 | Gear Ratio | N/A | 1.0 | 1.0 ... 100.0 | RW | Y | 10 = 1.0 | 2 | 2136h | 0 | 310 |
P3-12 | System Inertia Constant | N/A | 10 | 0 ... 100 | RW | Y | N/A | 1 | 2138h | 0 | 312 |
This defines the traction sheave diameter (<100 drive assumes inches)/(>=100 drive assumes mm).
This defines the roping ratio of the system.
This defines the Gear Ratio of the mechanical Gear.
This value can normally be left at the default value (10).