Group 9.2 Comfort Optimisation - Smooth Start Function
Parameter Number | Parameter Name | Units | Default | Available Settings | Access | Change During Run | Scaling | Size (Bytes) | CAN Register | CAN Sub Index | Modbus Register |
|---|---|---|---|---|---|---|---|---|---|---|---|
P9-08 | Smooth Start Time | sec | 0.0s | 0.0 ... 5.0s | RW | Y | 1 = 0.1 s | 1 | 238Ch | 0 | 908 |
P9-09 | Smooth Start Speed | Hz / rpm / ft/s / m/s | 0.00Hz | 0.00 ... P8-01 | RW | Y | 1 = 0.01Hz | 2 | 238Dh | 0 | 909 |
P9-10 | Smooth Start Ramp Time | sec | 0.50s | 0.00 ... 600.00s | RW | Y | 1 = 0.01 s | 2 | 238Eh | 0 | 910 |
Sets the time that the Smooth Start Function is active for once the drive reaches the speed set in P9-09.
Must have a value > 0 for Smooth Start to be active.
Sets the target speed for the drive during the Smooth Start Function.
Must have a value > 0 for Smooth Start to be active.
Sets the ramp time to reach the target speed set in P9-09.