Group 4.6 - Torque Limits
Parameter Number | Parameter Name | Units | Default | Available Settings | Access | Change During Run | Scaling | Size (Bytes) | CAN Register | CAN Sub Index | Modbus Register |
|---|---|---|---|---|---|---|---|---|---|---|---|
P4-18 | Maximum Motoring Torque Limit | % | 200.0% | 0.0 ... 400.0% | RW | Y | 1 = 0.1% | 2 | 21A2h | 0 | 418 |
P4-19 | Maximum Regenerating Torque Limit | % | 150.0% | 0.0 ... 400.0% | RW | Y | 1 = 0.1% | 2 | 21A3h | 0 | 419 |
When operating in Vector Speed motor control modes (P4-01 = 0, 1, 3), this parameter defines the maximum torque limit.
Active only in Vector Speed motor control modes. Sets the maximum regenerating torque allowed by the drive.