Group 2.3 Communications - USB-C
Parameter Number | Parameter Name | Units | Default | Available Settings | Access | Change During Run | Scaling | Size (Bytes) | CAN Register | CAN Sub Index | Modbus Register |
|---|---|---|---|---|---|---|---|---|---|---|---|
P2-10 | PC/App Communications Loss Timeout | sec | 2.0s | 0.0 ... 5.0s | RW | N | 1 = 0.1s | 1 | 20D2h | 0 | 210 |
P2-11 | PC/App Communications Loss Action | N/A | 0: Trip | 0: Trip 1: Ramp to Stop then Trip 2: Ramp to Stop Only (No Trip) 3: Run at Inspection Speed (P8-09) | RW | N | N/A | 1 | 20D3h | 0 | 211 |
P2-13 | USB Port Enable | N/A | 1: Enabled | 0: Disabled 1: Enabled | RW | Y | N/A | 1 | 20D5h | 0 | 213 |
Sets the timeframe for a PC/App message to be sent to the drive before tripping.
Controls the behaviour of the drive following a loss of communications from either PC/Mobile App.
Setting | Drive Display | Reaction |
|---|---|---|
0 | triP | Immediate trip |
1 | r-triP | Ramp to stop then trip |
2 | StoP | Ramp to stop only (No Trip) |
3 | InSPct | Run at Inspection Speed (P8-08) |
Determines whether the USB port on the drive is enabled or not.
Setting | Function |
|---|---|
0 | Disabled - Messages can not be transferred via USB to the drive. |
1 | Enabled - Messages can be transferred via USB to the drive. |
If the USB port is disabled then the drive will show the message USB-P on the drive display, indicating that the USB port is disabled.